Siemens Sinumerik 840C Diagnostics Manual page 168

1 Alarms
1.5.1 Alarm description
160108 No trace activated
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
All traces are switched passive or no signal selected
Remedy
Switch at least one trace to active
Note
Applies as from SW 4
160109 Trace buffer already assigned ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Trace buffer assigned by measuring function
Remedy
Stop measuring function and restart Trace
Note
Applies as from SW 4
160110 Illegal NC No. ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
NC No. is illegal
Remedy
Specify axis name for a valid NC axis/spindle
Note
Applies as from SW 4
160111 Illegal component ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Component is illegal
Remedy
Specify valid component (SERVO)
Note
Applies as from SW 4
160112 Illegal signal selection ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Signal number is illegal
Remedy
Specify valid signal number
Note
Applies as from SW 4
160113 Illegal segment address ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Segment address is illegal
Remedy
Specify legal segment address
Note
Applies as from SW 4
1–160

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey