Siemens Sinumerik 840C Diagnostics Manual page 169

04/96
160114 Illegal offset address ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Offset address is illegal
Remedy
Specify legal offset address
Note
Applies as from SW 4
160115 Illegal measurement duration ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Measuring duration is illegal
Remedy
Specify legal measuring duration
Note
Applies as from SW 4
160116 Illegal trigger time ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Trigger time is illegal
Remedy
Specify legal trigger time
Note
Applies as from SW 4
160117 Illegal mode ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Mode is illegal
Remedy
Specify legal mode (0)
Note
Applies as from SW 4
160118 Illegal trigger condition ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
Trigger condition is illegal
Remedy
Specify legal trigger condition
Note
Applies as from SW 4
160119 Conversion error ...
Scan
Start-up application when converting the TRACE buffer
Effect
Signal values in the Trace buffer could not be converted
Explanation
–
Remedy
–
Note
Applies as from SW 4

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–161