Siemens Sinumerik 840C Diagnostics Manual page 121

04/96
110025 Floppy is full
Scan
DATA IN-OUT / DATA OUTPUT / ... / START
Effect
Wait
Explanation
The diskette is full
Remedy
Insert another diskette, continue by pressing the OK softkey
110026 Archive not created or not found
Scan
DATA IN-OUT / DATA INPUT / START
DATA IN-OUT / DATA OUTPUT / ... / START
Effect
–
Explanation
The archive has not been written or no archive has been found
Remedy
Read in: Transfer another archive
Read out: Check data/archive or job list/transfer format
110027 ... is not an archive file
Scan
DATA IN-OUT / DATA OUTPUT / ARCHIVE LIST
Effect
–
Explanation
The selected data is not an archive list
Remedy
Select archive list with data selector
110028 No machining operation for ...
Scan
LOAD NC / SHOPFLOOR SHEET / MACHINING OPERATION
Effect
None
Explanation
The selected workpiece does not have a machining operation
Remedy
Create data
110029 Not a hexadecimal number
Scan
DATA IN-OUT / DEVICES / EDIT / STORE
Effect
Data cannot be stored
Explanation
Hexadecimal number: a–f, A–F, 0–9
Remedy
Correct
110030 Not a decimal number
Scan
DATA IN-OUT / DEVICES / EDIT / STORE
Effect
Data cannot be stored/softkey operation cannot be executed
Explanation Explanation
Decimal number: 0–9 without sign
Remedy
Correct
110031 Interface still transmitting data
Scan
DATA IN-OUT / DEVICES / SELECTION
Effect
Interface selection still being executed
Explanation
Interface selection not possible during output (e.g. printing)
Remedy
Delete print jobs or wait

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–113