Siemens Sinumerik 840C Diagnostics Manual page 175

04/96
161016 Trace triggered ...
Scan
Start-up application after trigger has occurred within the control for all active trace buffers.
Effect
–
Explanation
The selected triggers have been reached for all active Trace buffers
Remedy
–
Note
Applies as from SW 4
161017 Trace concluded ...
Scan
Start-up application after end of recording within control for all active Trace buffers.
Effect
–
Explanation
The selected traces have all been concluded, i.e. the selected measuring time has expired.
Remedy
–
Note
Applies as from SW 4
161018 Trace function aborted ...
Scan
Start-up application while Trace function in progress
Effect
All active trace functions are aborted
Explanation
The selected traces are aborted before expiry of the measuring time
Remedy
–
Note
Applies as from SW 4
165001 No drive is assigned to this slot
Scan
Storing, loading MD from an individual drive
Effect
Function is not executed
Explanation
Defined drive number is not assigned to any slot
Remedy
Match drive configuration and accept
165002 No data has been transmitted
Scan
Loading MD files
Effect
Function not executed
Explanation
The selected file does not contain the required MD
Remedy
Select another file
165003 There is no free memory left
Scan
–
Effect
–
Explanation
This message appears as a result of the previous operation and is self-explanatory
Remedy
–
165004 The DPRAM is assigned – data was not transferred
Scan
Saving, loading MD files
Effect
Function is not executed
Explanation
The link PC to NC is busy.
Remedy
Wait, startup end, NCK reset or Power On

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
1–167