Siemens Sinamics s120 Commissioning Manual page 105

3. Click the "Select" button.
Image 3-17 Setting the interface
4. In the selection list on the left-hand side, select the module that you want to use as the
interface.
5. Click the "Install" button.
The selected module is then listed in the "Installed" list.
6. Click the "Close" button.
You can then check the IP address of the integrated Ethernet interface as follows:
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Commissioning
3.3 STARTER commissioning tool
105