Trace Function; Single Trace - Siemens Sinamics s120 Commissioning Manual

4.2.2

Trace function

4.2.2.1

Single trace

You can use the trace function to record measured values over a defined period, depending
on trigger conditions. Alternatively, the measured values can also be recorded using
immediate recording.
In the STARTER commissioning tool you can parameterize the trace function by using the
"Trace" parameterizing screen form.
Calling the "Trace" parameterizing screen form
1. In the STARTER commissioning tool, click the symbol
generator).
The "Trace" parameterizing screen form is then displayed. Example:
Image 4-4
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Trace function
Diagnostics
4.2 Diagnostics via STARTER
(device trace-function
345