Siemens Sinamics s120 Commissioning Manual page 120

Commissioning
3.4 Creating a project in the STARTER commissioning tool
Enter the project data.
1. Enter the following project data:
– Project name: Project_1, can be freely selected
– Author: Any
– Storage location: Any
– Comment: Any
2. If necessary, correct the corresponding project data.
3. Click "Continue >".
Set up the PG/PC interface
The PG/PC interface can be setup in this window.
120
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5