Placing An Outside Call With Pre-Dial - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
Call Forward Split Settings – Call
24-09-01
Forwarding Type
Type of Call Forwarding.
Call Forward Split Settings – CO Call
24-09-02
Forwarding Destination for Both Ring, All
Call, No Answer
Assign CO Call Forwarding Destination for ring,
all call and no answer.
Call Forward Split Settings – Interim Call
24-09-03
Forwarding Destination for Both Ring, All
Call, No Answer
Assign Intercom Call Forwarding Destination
for ring, all call and no answer.
Call Forward Split Settings – CO Call
24-09-04
Forwarding Busy Destination
Assign CO Call Forwarding for busy
destinations.
Call Forward Split Settings – Intercom Call
24-09-05
Forwarding Busy Destination
Assign Intercom Call Forwarding for busy
destinations.
Service Tone Setup – Lockout Tone
80-01-01
(16)
Lock Out Tone Repeat Count.
Operation

Placing an outside call with pre-dial:

1. Dial 9.
Input Data
0 = Call Forwarding Off
1 = Call Forwarding with both
ring
2 = Call Forwarding when no
answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no
answer
5 = Call Forwarding when busy
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Value 0 ~ 255
1398
Default
0
*
,
No Setting
*
,
No Setting
*
,
No Setting
*
,
No Setting