Tandem Trunking To Speed Dial Number - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
System Options for Transfer – Disconnect
24-02-10
Trunk-to-Trunk
This timer starts after the Trunk-to-Trunk
warning tone is heard.
System Timers for VRS/DISA – Long
25-07-07
Conversation Warning Tone Time
Determine the time a DISA caller or any
trunk-to-trunk (such as Tandem Trunking)
conversation can talk before the Long
Conversation tone is heard.
System Timers for VRS/DISA – Long
25-07-08
Conversation Disconnect Time
Determine the time the system waits before
disconnecting a DISA or any trunk-to-trunk
(such as Tandem Trunking) conversation call
after the Long Conversation tone is heard.
Method D – Tandem Trunking to Speed Dial Number:
Program
Program Name/Description
Number
11-10-06 Service Code Setup (for System
Administrator) – Setting the Automatic
Transfer for Each Trunk Line
If the default service code (733) for enabling
Automatic Tandem Trunking feature is not
acceptable, change the code as required.
11-10-07 Service Code Setup (for System
Administrator) – Canceling the Automatic
Transfer for Each Trunk Line
If the default service code (734) for canceling
Automatic Tandem Trunking feature is not
acceptable, change the code as required.
11-10-08 Service Code Setup (for System
Administrator) – Setting the Destination for
Automatic Trunk Transfer
If the default service code (735) for setting the
destination of the Automatic Tandem Trunking
feature is not acceptable, change the code as
required.
Speed Dialing Number and Name – Speed
13-04-01
Dialing Data
Enter the number and name for the bins used to
hold the Automatic Tandem Trunking
destination.
Speed Dialing Number and Name – Name
13-04-02
Assign a name to each System Speed Dial bin.
Speed Dialing Number and Name – Transfer
13-04-03
Mode
Assign the transfer mode for each System
Speed Dial bin.
Input Data
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
Input Data
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
Maximum of 24 digits.
#
(1 ~ 9, 0, *,
Pause (Press line key 1)
Recall/Flash (Press line key 2)
@ = Code to wait for answer
supervision in ISDN (Press line
key 3)
Maximum of 12 characters
(Use dial pad to enter name).
0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group (IRG)
1204
Default
0
3600
10
Default
833
834
835
No Setting
No Setting
0