NEC UNIVERGE SV9100 Features And Specifications page 770

Program
Program Name/Description
Number
ToS Setup – ToS Mode
84-10-01
When Input Data is set to 1, Protocol 7 is
invalid. When Data is set to 2, Protocols 2 ~ 6
are invalid.
ToS Setup – Priority, IP Precedence
84-10-02
1 = Router queuing priority.
ToS Setup – Low Delay
84-10-03
1 = Optimize for low delay routing.
ToS Setup – Wideband (Throughout)
84-10-04
1 = Optimize for high bandwidth routing.
ToS Setup – High Reliability
84-10-05
1 = Optimize for reliability routing.
ToS Setup – Priority (D.S.C.P. -
84-10-07
Differentiated Services Code Point)
DSCP (Differentiated Services Code Point).
SIP Trunk CODEC Information Basic Setup –
84-13-01
Number of G.711 Audio Frames
Set the G.711 Audio Frame Number.
SIP Trunk CODEC Information Basic Setup –
84-13-02
G.711 Voice Activity Detection Mode
Enable/Disable the G.711 VAD Detection Mode.
SIP Trunk CODEC Information Basic Setup –
84-13-03
G.711 Type
Define the G.711 type.
SIP Trunk CODEC Information Basic Setup –
84-13-04
G.711 Jitter Buffer (min)
Set the minimum G.711 Jitter Buffer.
SIP Trunk CODEC Information Basic Setup –
84-13-05
G.711 Jitter Buffer (Average)
Set the average G.711 Jitter Buffer.
SIP Trunk CODEC Information Basic Setup –
84-13-06
G.711 Jitter Buffer (max)
Set the maximum G.711 Jitter Buffer.
Input Data
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
0 ~ 7
0 = Low
7 = High
0 ~ 1
0 = Normal Delay, Low Delay
0 ~ 1
0 = Normal Throughput
1 = High Throughput
0 ~ 1
0 = Normal Reliability
1 = Low Reliability
0 ~ 63
1 ~ 4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(Profile 1 ~ Profile 2)
0 = Disable
1 = Enable
(Profile 1 ~ Profile 2)
0 = A-law
1 = -law
(Profile 1 ~ Profile 2)
0 ~ 300ms
(Profile 1 ~ Profile 2)
0 ~ 300ms
(Profile 1 ~ Profile 2)
0 ~ 300ms
(Profile 1 ~ Profile 2)
770
Default
0
0
0
0
0
0
2
0
1
20
40
80