NEC UNIVERGE SV9100 Features And Specifications page 944

Program
Program Name/Description
Number
20-03-07 System Options for Single Line Telephones
– Trunk Call Dial Forced Sending Start Time
(Forced Dial)
Define the Trunk Call Dial Forced Sending Start
Time (Forced Dial) for single line telephones.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
20-13-13 Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
Ring Cycle Setup – Normal Incoming Call on
20-15-01
Trunk
Define the ring cycle for Incoming Internal calls.
Ring Cycle Setup – Incoming Internal Call
20-15-03
Define the incoming internal call ringing cycles
for each ring type.
Ring Cycle Setup – DID/DDI
20-15-05
Define the ring cycle for DID/DDI calls.
DTMF Tone Receiver Setup – Detect Level
80-03-01
Use Items 11 ~ 32 to set the criteria for dial tone
detection for outgoing ARS calls.
DTMF Tone Receiver Setup – Start Delay
80-03-02
Time
Define the start delay time for DTMF Tone
Receiver.
Input Data
0 ~ 64800 seconds
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
Ringing Cycle = 1 ~ 13
Ringing Cycle = 1 ~ 13
Ringing Cycle = 1 ~ 13
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
0 ~ 255
(0.25ms ~ 64ms)
944
Default
0
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 1
2
12
8
Type 1 ~ 5 = 0
Type 1 ~ 5 = 0