NEC UNIVERGE SV9100 Features And Specifications page 773

Program
Program Name/Description
Number
SIP Trunk Basic Information Setup – SIP
84-14-06
Trunk Port Number
Set the SIP UA (User Authorized) Trunk port
number (Receiving Transport for UNIVERGE
SV9100 SIP).
Each SIP Profile will need to have a different
SIP Listen Port.
SIP Trunk Basic Information Setup –
84-14-07
Session Timer Value
The Session Timer, when enabled, will allow
periodic refreshing of the SIP session using the
SIP Re-Invite message. The refreshing will
allow both the SV9100 and the Carrier to
determine if the session is still active. The
periodic refresh can be used to release calls
that are not active anymore when the SIP BYE
message may have been lost.
When this timer is set to 0, the session timer is
NOT included in the SIP Invite message.
SIP Trunk Basic Information Setup –
84-14-08
Minimum Session Timer Value
This timer controls the minimum accepted value
of the Session timer that the SV9100 will allow.
If the Session timer from the Carrier is lower
than the value defined here, the SV9100 will
deny the call.
SIP Trunk Basic Information Setup – Called
84-14-09
Party Information
This Program is used for inbound calls only.
When set to a 0 (Request-URI), the SV9100 will
look into the SIP "Request-URI" field to route
the inbound call.
When set to a 1 (To Header), the SV9100 will
look into the SIP "To" field to route the inbound
call.
SIP Trunk Basic Information Setup – URL
84-14-10
Type
Define the URL type for SIP trunks.
SIP Trunk Basic Information Setup – URL/To
84-14-11
HeaderSetting Information
When set to a 0 (Proxy Server Domain), the
SV9100 will use the proxy settings in Programs
10-29-12 and 10-29-13 within the SIP Request-
URI and To headers. If neither of these
programs are assigned, the value in program
10-12-11 is used.
When set to a 1 (SIP UA Domain), the SV9100
will use the domain settings in Program
10-28-02 within the SIP Request-URI and To
headers.
Input Data
1 ~ 65535
(Profile 1 ~ Profile 2)
1 ~ 65535 seconds
(Profile 1 ~ Profile 2)
1 ~ 65535 seconds
(Profile 1 ~ Profile 2)
0 = Request URI
1 = To Header
(Profile 1 ~ Profile 2)
0 = SIP-URL
1 = TEL-URL
0 = Proxy Server Domain
1 = SIP UA Domain
(Profile 1 ~ Profile 2)
773
Default
Profile 1 = 5060
Profile 2 = 5062
0
1800
0
0
0