NEC UNIVERGE SV9100 Features And Specifications page 368

Program
Program Name/Description
Number
DID Translation Number Conversion –
22-11-08
Maximum Number of DID Calls
For each DID Translation Table entry
(1 ~ 4000), specify the maximum number of
DID calls.
DID Translation Number Conversion – Music
22-11-09
On Hold Source
For each DID Translation Table entry
(1 ~ 4000), specify the source of music to be
used for DID trunks.
DID Translation Number Conversion – ACI
22-11-10
Music Source Port
For each DID Translation Table entry
(1 ~ 4000), if item 2 is selected in Program
22-11-09, specify the port to be used for the
source of music heard on DID trunks.
DID Translation Number Conversion – Ring
22-11-11
Group Transfer
Enable/Disable each conversion table to follow
the Ring Group programming defined in
Program 22-12-01: DID Intercept Ring Group. If
Program 22-11-05: DID Translation Number
Conversion, Transfer Destination Number 1
and Program 22-11-06: DID Translation
Number Conversion, Transfer Destination
Number 2 are set, the priority of transferring is
in this order: Program 22-11-05 then Program
22-11-06 then if Program 22-11-11 is enabled,
Program 22-12-01.
22-12-01 DID Intercept Ring Group
For each DID Translation Table, program the
DID Intercept destination. The destination can
be a Ring Group, In-Skin/External Voice Mail,
or Centralized Voice Mail. This program is used
when there is no destination programmed in
Program 22-11-05. It is unrelated to Program
22-11-06 and Program 22-11-07.
22-13-01 DID Trunk Group to Translation Table
Assignment
Assign the DID trunk groups to translation
tables. If all the DID trunks use the same type of
DID service, you may have only one DID trunk
group and one DID Translation Table (with
many entries).
VRS/DISA Line Basic Data Setup – VRS/
25-01-01
DISA Dial-In Mode
Determine whether the system should use
option 0 or option 1 (Use dial conversion table)
for calls.
Input Data
0 ~ 400 (0 = No Limit)
0 = IC/MOH Port
1 = BGM Port
2 = ACI Port
When a sound source type is 2
in above: (0 ~ 96)
0 = Disable (Caller hears
Ringback)
1 = Enable (Go to normal ring)
0 (No Setting)
1 ~ 100 (Incoming Ring Group)
102 (In-Skin/External Voice Mail
or InMail)
0 ~ 20
(0 = No Setting)
0 = Extension Number Service
Code Specify (Intercom)
1 = Use Dial Conversion Table
368
Default
0
0
0
1
1
1
0