Alarm Report Definitions - NEC UNIVERGE SV9100 Features And Specifications

Alarm Report Definitions

Alarm Report Heading
LVL
NO
STAT
DATE
TIME
ITEM
UNIT
SLT
PRT
PARAMETER
PKG Installation
ISDN Link
GCD-CP10 – LAN Link
Blocking
System Data Change
System Start Up
SMDR Link
STA
TRK
LNK
NET
System Information
The system can print a report of the blades installed, the port assignments, and the port types. This
information is sent to the extension defined in Program 90-13.
The System Information Reports indicate:
Date and Time of the Report
Blade names
Slot condition (working, blocked)
Port assignment
Port classification
Alarm Type (MAJ = Major, MIN = Minor)
Number of Alarm (4-digit)
Status (REC = Recovered, ERR = Error, WAR = Warning
Date the Alarm Occurred
Time the Alarm Occurred
Name of the Alarm
Name of the Blade
Chassis Slot Number
Chassis Port Number
Related Information
Blade is removed or inserted.
ISDN Line failure is detected.
GCD-CP10 – LAN connection failure is detected.
Terminal Failure may have occurred because terminal blocking is detected. Terminal
is unplugged or wire is disconnected.
System Upgrade performed or Programming change.
System is reset.
Connection failure is detected between the GCD-CP10 and SMDR printer device.
DSP for IP Station Call were all busy.
DSP for Trunk Call were all busy, includes SIP trunks.
DSP for Net-Link Call were all busy.
DSP for CCISoIP Networking Call were all busy.
30
Definitions