NEC UNIVERGE SV9100 Features And Specifications page 198

Program
Program Name/Description
Number
11-11-13 Service Code Setup (for Setup/Entry
Operation) – Display Language Selection for
Multiline Terminal
Select the service code which can be used at
an extension to change the displayed language
on a multiline terminal display.
Service Code Setup (for Service Access) –
11-12-01
Bypass Call
Define the service code for Activating Call
Forwarding/Do Not Disturb Override. This code
is available only if you disable the voice mail
Single Digit dialing code in Program 11-16-09.
Service Code Setup (for Service Access) –
11-12-14
Trunk Group Access
Define the service code which should be used
by an extension user to select outgoing Trunk
Group.
Basic Trunk Data Setup – Trunk Name
14-01-01
Set the names for trunks. The trunk name
displays on a multiline terminal for incoming
and outgoing calls.
Basic Trunk Data Setup – Transmit Level
14-01-02
Customize the transmit and receive levels of
the CODEC Gain Types for each trunk.
Basic Trunk Data Setup – Receive Level
14-01-03
Customize the transmit and receive levels of
the CODEC Gain Types for each trunk.
Basic Trunk Data Setup – Outgoing Calls
14-01-07
Allow or Deny outgoing calls on the trunk you
are programming.
Basic Trunk Data Setup – DTMF Tones for
14-01-10
Outgoing Calls
For each trunk, Enable/Disable the ability to
hear the DTMF of the digits dialed when placing
the outgoing call.
Analog Trunk Data Setup – Dial Tone
14-02-05
Detection for Manually Accessed Trunks
Enable/Disable dial tone detection for directly
accessed trunks. If disabled, the system
outdials on the trunks without monitoring for dial
tone.
Analog Trunk Data Setup – Next Trunk in
14-02-11
Rotary if No Dial Tone
Enable/Disable the system ability to skip over a
trunk if dial tone is not detected. This option
pertains to calls placed using Call Appearance
(CAP) Keys, Speed Dial, Automatic Route
Selection (ARS) (ARS), Last Number Redial or
Save Number dialed. It does not pertain to line
key or Direct Trunk Access calls.
Input Data
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
Maximum of 12 Characters
Trunks 1 ~ 400
1 ~ 57
(-15.5 ~ +12.5dB in 0.5dB
intervals)
Trunks 1 ~ 400
1 ~ 57
(-15.5 ~ +12.5dB in 0.5dB
intervals)
0 = Deny (No)
1 = Allow (Yes)
0 = Disable
1 = Enable
0 = Dial Tone Detection Not
Used
1 = Dial Tone Detection Used
0 = Disable
1 = Enable
198
Default
778
807
804
Line 001
Line 002
Line 003
:
Line 400
32 (0dB)
32 (0dB)
1
0
0
0