Conference – Remote - NEC UNIVERGE SV9100 Features And Specifications

Conference – Remote
Description
The Remote Conference feature enhances the built in conference capabilities of the SV9100 by allowing
outside parties to dial a Remote Conference pilot number and password to connect to a Conference call.
The conference circuits on the CPU are used to join each party to the conference. A maximum of 32
conference participants is possible for one Conference.
A maximum of 20 simultaneous Remote Conference calls are possible with proper licensing and
available conference resources. In addition, the conference call can be password protected so that any
user joining the conference would be required to enter a password before being connected.
Conditions
The Barge-In feature cannot be used when an extension is on a Remote Conference call.
The Remote Conference pilot number cannot be set as the destination for Call Forward.
A Remote Conference participant cannot place the conference call on Hold.
Calls cannot be transferred to a Remote Conference pilot.
The maximum number of system conference resources is 96. If the built in modem
functionality is enabled this is reduced to 64.
Each extension or trunk needs one conference channel to participate in a conference.
The maximum number of participants per Remote Conference is 32 if conference resources
are available.
A maximum of 20 simultaneous Remote Conferences are possible if conference resources
are available.
Up to 96 callers can participate in a Remote Conference if conference resources are
available and the built in modem is disabled.
A conference call cannot be split over the CPU's conference blocks.
When joining a conference a busy tone will be heard if the maximum number of Remote
Conference participants has been reached or if a conference resource is not available.
As the conference time limit nears, the system will provide a warning tone to all participants
based on Program 20-34-05. Once this timer expires, if the conference is still ongoing, the
participants will be disconnected by the system.
If an incorrect password is entered a warning tone is heard and the caller must hang up and
dial back into the conference pilot.
One Remote Conference license (0047) is required for each Remote Conference.
A VRS license (1001) is required for the Remote Conference only if you are going to
password protect the conference as VRS is used to play the "please enter your password"
prompt. At default, remote conferences are set to prompt for a password in Program
20-34-06 and conferences 1-4 have passwords set. If you set the conference to 1 (Skip) in
Program 20-34-06 you do not need the VRS license but still need the remote conference
license (0047).
251