NEC UNIVERGE SV9100 Features And Specifications page 84

Program
Program Name/Description
Number
ARS/F-Route Table – Delete Digits
44-05-02
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Enter the number of
digits to be deleted (0 ~ 255) from the dialed
number.
ARS/F-Route Table – Additional Dial Number
44-05-03
Table
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Enter the table number
(defined in Program 44-06) for additional digits
to be dialed (0 ~ 1000).
ARS/F-Route Table – Beep Tone
44-05-04
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select whether or not a
beep is heard if a lower priority trunk group is
used.
ARS/F-Route Table – Gain Table Number for
44-05-05
Internal Call
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the gain table
number to be used for internal calls (0 ~ 500).
ARS/F-Route Table – Gain Table Number for
44-05-06
Tandem Connections
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the gain table
number to be used for the tandem call (defined
in Program 44-07)
ARS/F-Route Table – ARS Class of Service
44-05-07
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Class of
Service to be used for ARS (0 ~ 16). Extension
ARS COS is determined in Program 26-04-01.
ARS/F-Route Table – Dial Treatment
44-05-08
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Dial
Treatment to be used (0 ~ 15). The Dial
Treatments are defined in Program 26-03-01.
ARS/F-Route Table – Maximum Digit
44-05-09
Set the maximum number of digits to send
when using the F-Route.
ARS/F-Route – CCIS over IP Destination
44-05-10
Point Code
For each ARS/F-Route table (1 ~ 500). Set the
CCIS over IP Destination Point Code
(0 ~ 16367).
Input Data
0 ~ 255
(255 = Delete All)
0 ~ 1000
0 = Off (No Beep)
1 = On (Beep)s
0 ~ 500
0 = No Setting
0 ~ 500
0 = No Setting
0 ~ 16
0 ~ 15
0 ~ 24
0 ~ 16367
84
Default
0
0
0
0
0
0
0
0
0