Sip Extension Basic Information Setup - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
84-19-49 SIP Extension IP CODEC Information Basic
Setup – RTP Filter
To avoid incorrect voice pass connection, this
Program checks the sending side address from
received RTP packet at VoIPDB.
84-33-01 SIP Extension IP CODEC Information Basic
Setup – FAX Relay Mode
Enable/Disable the FAX relay mode.
84-33-02 SIP Extension IP CODEC Information Basic
Setup – T.38 Protocol Mode
Sets the T.38 protocol mode.
84-33-06 SIP Extension IP CODEC Information Basic
Setup – FAX Maximum Rate
Sets the maximum FAX rate.
84-33-10 SIP Extension IP CODEC Information Basic
Setup – TCF Handling Method
Sets the training confirmation handling mode,
local denotes that the VoIP DB will generate
tone and check, Network denotes that TCF is
sent over the network provider.
84-33-18 SIP Extension IP CODEC Information Basic
Setup – T.38 RTP Format Payload Number
Sets the payload number for T.38 RTP Format.
VoIPDB DTMF Setup – DTFMF Relay Mode
84-34-01
Define the DTMF Relay Mode for Type 4 SIP
Extension.
VoIPDB DTMF Setup – DTMF Payload
84-34-02
Number
Set DTMF Payload for standard SIP
extensions.

SIP Extension Basic Information Setup:

Program
Program Name/Description
Number
SIP Extension Basic Information Setup –
84-20-01
Registrar/Proxy Port
Define SIP station Proxy Port.
SIP Extension Basic Information Setup –
84-20-02
Session Timer Value
Define the periodic refresh time that allows both
user agents and proxies to determine if the SIP
session is still active.
Input Data
0 = Disable
1 = Enable
2 = Enable (include SSRC)
0 = Disable
1 = Enable
2 = Each Port Mode
1 = U/R
2 = RTP
3 = UDPTL
0 = V.27ter, 4800bps
1 = V.29, 9600bps
2 = V.17, 14400bps
0 = Receive TCF signal by
VoIPDB
1 = Through TCF signal to
external FAX
0, 2, 8, 96 ~ 127
0 = Disable
1 = RFC2833
2 = H.245
96 ~ 127
Input Data
1 ~ 65535
1 ~ 65535
736
Default
0
0
1
2
1
103
0
110
Default
5070
180