Webpro - NEC UNIVERGE SV9100 Features And Specifications

Required Component(s)
PCPro
PC connection with WebPro
Related Features

PC Programming
Guide to Feature Programming
Refer to PC Programming
Operation
PCPro:
1. Obtain the firmware package file from NEC.
2. Open and login to PCPro.
3. Connect to the system.
4. Under the Home menu, choose the Upgrade SW option.

Until connected to the system the Firmware Update option is grayed out.
5. In the Firmware Update window, browse to the location of the Firmware Package file. Only the
.mdu file will be applicable here. For example, the file name might be 'SV9100_v1.xx.xx'.
6. Select the schedule type:
Immediately after upload
At the time...
If you choose At the time..., select the date and time you want the GCD-CP10 to reset and switch over to

the new software version.
Click Start. PCPro uploads the firmware package file, and updates the system at the time you specified in step 6.

WebPro

1. Obtain the firmware package file from NEC.
2. Open and login to WebPro.
3. On the Home Page, choose Firmware Update.
4. In the Firmware Update page, browse to the location of the Firmware Package file. For example,
the file name might be 'SV9100_v1.00RemoteUpgrade.mem'.
5. Select the schedule type:
Immediately after upload
At the time...
1009