NEC UNIVERGE SV9100 Features And Specifications page 765

Program
Program Name/Description
Number
SIP Server Information Setup – Registrar
10-29-05
Mode
This program is used to Enable/Disable the
ability to Register to the ITSP.
In Registration mode (IP or Domain Name)
this MUST be enabled.
SIP Server Information Setup – Registrar IP
10-29-06
Address
Define the Registrar IP Address. The carrier
may provide an IP address. In most cases, a
domain name is used so this entry is left at the
default.
SIP Server Information Setup – Registrar
10-29-07
Port Number
Define the Registrar Port Numbers.
SIP Server Information Setup – Registrar
10-29-11
Domain Name
Define the Registrar Domain Name (normally
provided by the SIP carrier).
For example: mysipserver.sipprovider.com
SIP Server Information Setup – Domain
10-29-12
Name
Define the domain name of the SIP PROXY
Server provided by the SIP Carrier.
For example: if the SIP Proxy server address is
proxy.sipprovider.com, you would assign
sipprovider.com in this program.
If no SIP Proxy address is provided, use the SIP
Registration address as the proxy address.
SIP Server Information Setup – Proxy Host
10-29-13
Name
Assign the Proxy Host Name of the SIP PROXY
Server provided by the SIP Carrier.
For example: if the SIP Proxy server address is
proxy.sipprovider.com, you would assign proxy
in the program.
If no SIP Proxy address is provided, use the SIP
Registration address as the proxy address.
SIP Server Information Setup – SIP Carrier
10-29-14
Choice
Define the SIP Carrier Choice.
Selecting Carrier B automatically sets
Program 10-29-16 to on (1). Program 10-29-16
MUST be set to off for incoming calls to route using
the lowest available trunk port.
Each certified vendor my use a different carrier
type. Visit NTAC website (http://www.necntac.com)
to verify the proper setting per vendor.
Input Data
0 = None
1 = Manual
(Profile 1 ~ Profile 2)
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
(Profile 1 ~ Profile 2)
0 ~ 65535
(Profile 1 ~ Profile 2)
Maximum of 128 characters.
(Profile 1 ~ Profile 2)
Maximum of 64 characters.
(Profile 1 ~ Profile 2)
Maximum of 48 characters.
(Profile 1 ~ Profile 2)
0 ~ 26
1 ~ 26 =
Carrier Type A ~ Carrier Type Z
(Profile 1 ~ Profile 2)
765
Default
0
0.0.0.0
5060
No Setting
No Setting
No Setting
0