NEC UNIVERGE SV9100 Features And Specifications page 909

Program
Program Name/Description
Number
Tie Line Initial Setup – Wink/Delay Signal
81-11-10
Detect Timeout Selection
Specify a maximum time for receiving an
acknowledgment signal from a distant system
before sending a busy tone.
Tie Line Initial Setup – Disconnect
81-11-11
Recognition Time Selection
Specify the minimum time before a
disconnected circuit can be accessed again.
Tie Line Initial Setup – Automatic Release
81-11-12
Signal Detection Selection
Specify the signal detection time for release of
a Tie Line after a disconnect signal is received
from the distant Central Office or PBX.
81-11-13 Pause Time Selection
Specify the length of a pause (500 ~ 7500ms).
Operation
None
Input Data
0 = 8
1 ~ 15
(1 ~ 15 seconds)
1 ~ 15
(0.1 ~ 1.5 seconds)
(0 = No Setting)
1 ~ 14
(50 ~ 700 ms)
15 = (No Limit)
(0 = No Setting)
1 ~ 15 (500 ~ 7500ms
909
Default
7
3 (0.3 seconds)
7 (350ms)
6 (3000ms)