Supported Terminals; Conversion Exception - NEC UNIVERGE SV9100 Features And Specifications

Supported Terminals

SV8100 Supported Terminals
Dterm80/85 (DTH & DTR)
DT300 Series (DTL)
DT400 Series (DTL)
DT700 Series (ITL)
DT800 Series (ITL)
MH240
ML440
Bluetooth Cordless Handset (BCH)
SLT
SIP Terminal
IP-DECT
Softphone
DTL-8R-1 Cordless terminal
Cordless terminals (DTH-4R-1/DTR-1R-2) are not supported.

Conversion Exception

SV8100 Conversion Exception
SV8100 Program
Number
10-03 (VoIP)
10-40
10-26-01
10-26-03
10-29-08
10-29-09
10-29-10
84-32-01 ~ 84-32-07
84-01-69 ~ 84-01-71
Terminal
SV9100 Program
Number
10-68
14-18
15-05-50
15-05-50
10-67-01
10-67-02
10-67-03
84-33-12 ~ 84-33-18
84-35-01 ~ 84-35-03
Supported
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Comments
The conversion of data for VOIP does not support conversion.
The VOIP package of SV8100 is deleted after conversion
completion. Please set VOIP package with blade configuration.
Thereafter IP trunks are set in Program 10-68.
The conversion of IP system communication mode, the peer to
peer mode does not support conversion. It is changed to the
extension terminal-based setting. After conversion completion,
Please set Program 15-05-50.
The conversion of IP system communication mode, the peer to
peer mode does not support conversion. It is changed to the
extension terminal-based setting. After conversion completion,
Please set Program1 5-05-50.
The conversion of SIP server information, DNS server setting
does not support conversion. Please set Programs 10-67-01,
10-67-02 and 10-67- 03.
The conversion of Fax over IP Codec information does not
support conversion. Please set Program 84- 33 for every type.
The conversion of RFC2833 play out level setting does not
support conversion. Please set Program 84- 35 for every type.
870