Intercom; Busy Status Display - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Intercom

Intercom gives extension users access to other extensions. This provides the system with complete

internal calling ability.

Handsfree Answerback/Forced Intercom Ringing

Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by

speaking toward the telephone, without lifting the handset. Like Handsfree, this is a convenience for

workers who do not have a free hand to pick up the handset. Refer to Handsfree Answerback/Forced

Intercom Ringing feature for more information.

When a display multiline terminal user places an Intercom call to a busy extension, the details of the

busy status (who is talking to the extension or which line is in use by the extension) can be displayed.

The details of the trunk busy status (the extension using the line) can be displayed after trying to access

the trunk. This feature provides a user information which can determine whether they should use

Barge-In for the extension or trunk. This information automatically displays for a multiline terminal once

Preventing ICM calls does not affect dialing other service codes, including 911.

Intercom calls can ring or be voice-announced at the called extension.

Ringing Line Preference can automatically answer ringing Intercom or trunk calls when the

user lifts the handset.

An extension can have a name assigned that identifies the extension to callers.

Dialing 9 or any other trunk access code after dialing a busy extension results in termination

of the Intercom call and seizing a trunk.

For a station to retrieve a held ICM call, the station must have an ICM key assigned in

Program 15-07 (*00).

A special ringtone is provided when a pre-assigned extension places an Intercom call.

The incoming ringtone from a pre-assigned extension (set in Program 15-01-13) is limited to

calls to the actual extension, not the Virtual Extension. Incoming calls to the VE follows

Program 15-08-1 settings.

Default Settings

System Availability