NEC UNIVERGE SV9100 Features And Specifications page 301

Program
Program Name/Description
Number
20-13-12 Class of Service Options (Supplementary
Service) – Room Monitor, Extension Being
Monitored
Turn Off or On an extension ability to be
monitored by other extensions.
20-13-13 Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
20-13-14 Class of Service Options (Supplementary
Service) – Department Calling (PLT No
Called Extension)
Turn Off or On an extension user ability to call a
Department Group Pilot.
20-13-15 Class of Service Options (Supplementary
Service) – Barge-In, Initiate
Turn Off or On an extension user ability to
Barge-in on other's calls.
20-13-16 Class of Service Options (Supplementary
Service) – Barge-In, Receive
Turn Off or On Barge-In at the receiving
extension (i.e., Barge-In receive).
20-13-17 Class of Service Options (Supplementary
Service) – Barge-In Tone/Display (Intrusion
Tone)
Turn Off or On the Barge-In (Intrusion) Tone. If
disabled, this also turns off the Barge-In display
at the called extension.
20-13-18 Class of Service Options (Supplementary
Service) – Programmable Function Key
Programming (General Level)
Turn Off or On an extension user ability to
program General function keys using Service
Code 851 (by default). (Refer to Program
20-07-10 for Service Code 852.)
20-13-19 Class of Service Options (Supplementary
Service) – Selectable Display Messaging
(Text Messaging)
Turn Off or On an extension user ability to use
Selectable Display Messaging.
20-13-20 Class of Service Options (Supplementary
Service) – Account Code/Toll Restriction
Operator Alert (Restricted Operation
Transfer)
Turn Off or On operator alert when an extension
improperly enters an Account Code or violates
Toll Restriction.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
301
Default
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0