NEC UNIVERGE SV9100 Features And Specifications page 528

Guide to Feature Programming
Program
Program Name/Description
Number
15-07-01 Programmable Function Keys
Assign a function key for Handset Transmission
Cut Off (code 40).
Service Tone Setup – Repeat Count
80-01-01
Customize the system basic tones and system
service tones. The system must be reset for
the changes to take effect.
Service Tone Setup – Basic Tone Number
80-01-02
The following features require that the system
tones listed below be changed to match the
table. After changing these settings the system
must be reset for the changes to take effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Service Tone Setup Defaults, Program 80-01-01
Service
Tone No.
1 No Tone
2 Internal Dial Tone
3 Stutter Dial Tone
Repeat
Service Tone
Input Data
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 ~ 255
(0 = until On-Hook)
1 ~ 33
(0 = No Tone)
(33 = Default Time Slot)
Unit Basic
Count Count Tone No.
0 Basic 1 0
0 Basic 1 9
0
0 Basic 6
9
0
9
0
9
528
Default
Refer to Table 2-
31 Service Tone
Setup Defaults,
Program
80-01-01
(33 = Default
Time Slot)
Refer to Table 2-
32 Service Tone
Setup, Program
80-01-02
Gain Level
Duration
(dB)
10 32 (0dB)
10 32 (0dB)
2
32 (0dB)
1
1
1
1
77