Program
Program Name/Description
Number
Incoming Call Trunk Setup – Incoming Type
22-02-01
If you want a trunk to be a DIL to a Department
Group, assign Service Type 4 for each Night
Service Mode. Refer to Program 22-07-01.
22-07-01
DIL Assignment
For each trunk assigned Service Type 4 in
Program 22-02-01 above, assign the DIL
destination as the Department Group pilot
number (as assigned in Program 11-07-01).
For this selection to work, set Program
22-02-01 to 4 (DIL).
System Options for Transfer – Message Wait
24-02-05
Ring Interval Time
For Single Line Telephones (SLTs) without
message waiting lamps, this is the time
between intermittent ringing. If this value is set
to 0, the system rings once.
System Options for Transfer – Delayed
24-02-08
Transfer Timer for All Department Groups
Determine the time a call should ring a
Department Group before transferring the call.
24-05-01
Department Group Transfer Target Setup
Assign the Speed Dial bin to each Department
Group to hold the destination for the immediate
automatic transfer of ICM and transferred calls
to the Department Group feature.
Operation
To call a department group:
1.
Go off-hook.
2.
Dial department extension number.
The system routes the call to the first free telephone in the department group.
3.
Optional: To manually ring all members of the group, dial the single digit service code assigned
for All Member Ring (Program 11-16-10).
To log out of your Department Calling Group:
While you are logged out, Department Calling cannot route calls to your extension.
1.
Press Speaker
Input Data
Incoming Type for Day/Night
Mode (1 ~ 8):
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
Day/Night Modes (1 ~ 8):
Extension Number (maximum of
eight digits)
Pilot Number
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 9999
337
Default
0
No Setting
30
10
9999