NEC UNIVERGE SV9100 Features And Specifications page 819

Hide thumbs Also See for UNIVERGE SV9100:
Table of Contents

Advertisement

Program
Program Name/Description
Number
Trunk Group – Trunk Group Number
14-05-01
For Auto-Answer of Non-Ringing Lines, assign
trunks to trunk groups. This is part of Trunk
Group Routing programming.
20-09-08
Class of Service Options (Incoming Call
Service) – Calling Party Information
Turn Off or On and extension ability to display
calling party information on CCIS calls.
Class of Service Options for DISA/E&M –
20-14-02
Trunk Group Routing/ARS Access
Enable/Disable a DISA or tie trunk caller ability
to dial 9 for Trunk Group Routing or Automatic
Route Selection (ARS).
22-02-01
Incoming Call Trunk Setup
For each Night Service mode, enter service
type for each trunk.
Automatic Route Selection Service – ARS
26-01-01
Service
Enable/Disable ARS.
Automatic Route Selection Service – Class
26-01-06
of Service Match Access
With the ARS Class of Service Match Access
feature, you can determine whether or not the
system should allow a call based on the COS
assigned to the Dial Analysis Table (Program
26-02). This change can be used to create a
tenant-like application. It then uses the trunk
group set in the Additional Entry in Program
26-02-03 to place the out-going call. When this
feature is enabled, the calls are routed in
sequential order, and forward – provided the
Class of Service for the trunk groups match.
Automatic Route Selection Service –
26-01-07
F-Route Access COS Reference
Define the system options for Automatic Route
Selection (ARS).
Input Data
Trunk Port 1 ~ 400 =
Priority 1 ~ 400
0 = Off
1 = On
0 = Off
1 = On
Trunks 1 ~ 200
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0 = Disabled (ARS service is
Off)
1 = Enabled (ARS service is On)
0 = Disable (Off)
1 = Enable (On)
0 = F-Route
1 = ARS
819
Default
Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities
equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
0
0
0
0

Advertisement

Table of Contents
loading

Table of Contents