NEC UNIVERGE SV9100 Features And Specifications page 583

Program
Program Name/Description
Number
Multiline Telephone Basic Data Setup – MSG
15-02-26
Key Operation Mode
Determine whether an extension MSG key
should function as a Message key or Voice Mail
key. If set as a Message key, the user can press
it to call the voice mail only when they have new
messages. If set as a Voice Mail key, it
functions as a normal Voice Mail key (it is not
active if Centralized Voice Mail is used).
Multiline Telephone Basic Data setup –
15-02-28
Message Waiting Lamp Color
Determine whether an extension Message
Waiting Lamp lights Green or Red when a
message is received.
Multiline Telephone Basic Data Setup –
15-02-37
Voice Mail Message Wait Lamp Color
Select the color of the large LED when a voice
mail message is waiting at the extension.
Single Line Telephone Basic Data Setup –
15-03-01
SLT Signaling Type
For each UNIVERGE SV9100 voice mail
extension, set this option to 0.
Single Line Telephone Basic Data Setup –
15-03-03
Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
Single Line Telephone Basic Data Setup –
15-03-09
Caller ID Function – for External Module
This option must be 0 when voice mail is used
or the integration code for the disconnect
function is incorrect.
Input Data
0 = Message Key
1 = Voice Mail Key
0 = Green
1 = Red
0 = Green
1 = Red
0 = DP
1 = DTMF
0 = Normal
1 = Special
0 = Disable (Off)
1 = Enable (On)
583
Default
0
1
1
1
0
0