NEC UNIVERGE SV9100 Features And Specifications page 537

Guide to Feature Programming
Program
Program Name/Description
Number
11-11-15 Service Code Setup (for Setup/Entry
Operation) – Enable Handsfree Incoming
Intercom Calls
If required, change the service code used for
setting an extension to voice announce for
incoming ICM calls.
11-11-16 Service Code Setup (for Setup/Entry
Operation) – Force Ringing of Incoming
Intercom Calls
If required, change the service code used for
setting an extension to forced ringing for
incoming ICM calls.
Service Code Setup (for Service Access) –
11-12-06
Switching of Voice Call and Signal Call
If required, change the service code used for
toggling an outgoing ICM call between a voice
call and signal call.
Multiline Telephone Basic Data Setup –
15-02-16
Handsfree Operation
Enable/Disable an extension user ability to use
the speakerphone on outside calls. When
disabled, the user can hear the conversion, but
cannot respond handsfree.
System Options for Multiline Telephones –
20-02-12
Forced Intercom Ring (ICM Call Type)
Enable/Disable Forced Intercom Ringing. If
enabled, incoming Intercom calls normally ring.
If disabled, Intercom calls voice-announce.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Input Data
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
0 = Disable
1 = Enable
0 = Disable (Voice)
1 = Enable (Signal)
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
537
Default
821
823
812
1
0
Extension port
101 = Class 15
All other
extension port =
Class 1