Video Support Over Sip Trunks - NEC UNIVERGE SV9100 Features And Specifications

Video Support over SIP Trunks

Description
The SV9100 can support video calling over SIP interconnection trunks. IP Trunk License (5001), IP
Terminal License (5111), SIP Video License (0040), System Port License (0300) and Version R1 License
(0411) are required.
Conditions
Calls over SIP Interconnection while in P2P mode cannot be put on hold.
Calls over SIP Interconnection while in P2P mode cannot be transferred, i.e. an internal call
cannot be transferred to a SIP Interconnection trunk.
A video call cannot be changed to a voice call. A voice call cannot be changed to a video
call.
Video capability in the initial invite message is required for the Video Terminal.
When using an MCU, the SV9100 requires the Carrier Type Setting (Program 10-29-14) to
be set to 0 = Standard.
When using an MCU, the same video capability must be set between the MCU and the
Video SIP Terminal.
Default Settings
This feature is not enabled at default.
System Availability
Terminals
Polycom HDX4003
Polycom VVX1500D
Required Component(s)
GCD-CP10 with GPZ-IPLE installed.
761