Simple Mcu Video - NEC UNIVERGE SV9100 Features And Specifications

Simple MCU Video

Description
The Simple MCU Video feature provides a built in video conferencing MCU for up to four standard SIP
phones using the Remote Conference feature of the SV9100 system.
The video functionality can also be set to use system VoIP DSP resources for non-MCU video
conferencing if peer-to-peer calls between standard SIP phones is disabled or not supported by the
terminal used. If the system is set to allow peer-to-peer calls between standard SIP stations then no
system DSP resources are required to support the video functionality between standard SIP phones.
Maximum of Four Standard SIP Phone Users
Conditions
CO calls cannot be transferred to a Remote Conference pilot and must directed to the
conference pilot as a DID or DIL termination.
If peer-to-peer is disabled the standard SIP video feature requires VoIP DSP resource be
reserved for this function reducing the number of VoIP resources available for SIP phone
calls.
The system will always reserve 64 of the total 256 VoIP DSP resources for SIP voice calls.
When set in programming the following tables show how many resources are reserved for
each video mode. The total number of VoIP resources reserved for video cannot be higher
than 192.
1072