NEC UNIVERGE SV9100 Features And Specifications page 715

Program
Program Name/Description
Number
License Configuration for Each Package –
10-54-01
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
If applying more than 255 licenses to a slot, the
licenses must be applied across multiple
indexes.
For example, assigning 256 VoIP resource
licenses (5103) to the CPU slot could be
assigned using different methods as long as the
total for the CPU slot is 256.
1. Index 1 has 128 of feature code 5103 and
index 2 also has 128 of feature code 5103 for a
total of 256.
2. Index 1 has 255 of feature code 5103 and
index 2 has 1 of feature code 5103 for a total of
256.
Analog Trunk Data Setup – Caller ID
14-02-23
Receiving Method
Rings extension before receiving Caller ID (1)
or after receiving Caller ID (0).
Recommended setting is 0 (Wait Caller ID).
Multiline Telephone Basic Data Setup –
15-02-13
Redial List Mode
Select the type of numbers that are stored in
the Redial List – Internal and External numbers
(0) or External only (1).
For the ML440/G566/G266 extensions this
should be set to 0.
Multiline Telephone Basic Data Setup – Call
15-02-34
Register Mode
The Caller ID Scroll stores Trunk calls only (0),
or both Internal and Trunk calls (1).
For the ML440/G566/G266 extensions this
should be set to 1.
IP Telephone Terminal Basic Data Setup –
15-05-28
Addition Information Setup
Determines manner in which CID id presented
to an extension.
For the ML440/G566/G266 extensions this
should be set to 1.
IP Telephone Terminal Basic Data Setup –
15-05-50
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
Input Data
1 ~ 255 Resource Licenses
0 = Wait Caller ID
1 = Immediate Ring
0 = ICM/Trunk (Extension/Trunk
Mode)
1 = Trunk Mode
0 = Trunk Mode
1 = Extension/Trunk Mode
0 = Do not inform
1 = Inform
0 = Disable
1 = Enable
715
Default
0
1
1
0
0
1