NEC UNIVERGE SV9100 Features And Specifications page 709

Supported System Feature List (Continued)
Feature Name
Handset Mute
Handsfree
Handsfree Answerback/Forced
Intercom
Headset Operation
Hold
Hotel/Motel
Hotline
Howler Tone Service
InMail
Intercom
IP Multiline Station (SIP)
IP Single Line Telephone (SIP)
IP Trunk – (SIP) Session Initiation
Protocol
IP Trunk – H.323
ISDN Compatibility
K-CCIS – IP
K-CCIS – T1
Last Number Redial
Line Preference
Long Conversation Cutoff
Meet Me Conference
Meet Me Paging
Meet Me Paging Transfer
Memo Dial
Message Waiting Indication (MWI)
Microphone Cutoff
ML440 G566 G266
Yes Yes Yes
Yes Yes Yes
No No No
Yes Yes Yes
Yes Yes Yes
No No No
Yes No No
No No No
Yes Yes Yes
Yes Yes Yes
Yes No No
No Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes No No
Yes Yes Yes
Yes No No
Yes Yes Yes
Yes Yes Yes
No No No
Yes No No
Yes Yes Yes
709
Comments
This is a function of the handset.
This is a function of the handset.
This is a function of the handset.
G566/G266 supported system hold only.
Ml440 – The ML440 does not follow Hotline for
speaker 20-08-19 only Hotline for hand piece
20-08-09.
Voice mail softkeys are not provided to handset. Live
monitor is not supported.
The following programs must be disabled, set to 0,
when using a ML440 handset in a CCISoIP network:
Peer-to-Peer – 15-05-50 (0)
Link Reconnect – 50-06-01 (0)
Call Redial function is a function of the handset.
With ML440 an alarm tone is not provided before
cutoff.
The ML440 can initiate a Meet Me Conference but
cannot receive internal pages to join an internal Meet
Me Conference.
Can initiate a Meet Me Paging but cannot receive
internal pages to respond to an Internal Meet Me
Page.
Can initiate a Meet Me Paging Transfer but cannot
receive internal pages to respond to an Internal Meet
Me Transfer page.
ML440 only supports voice mail MWI.
This is a function of the ML440 handset.