NEC UNIVERGE SV9100 Features And Specifications page 823

Program
Program Name/Description
Number
44-02-02 Dial Analysis Table for ARS/F-Route Access
– Service Type
Select the Service Type.
44-02-03 Dial Analysis Table for ARS/F-Route Access
– Additional Data
Enter the additional data required for the
service type selected in Program 44-02-02,
either the number of digits to be deleted or the
table number to be used.
ARS/F-Route Table – Trunk Group Number
44-05-01
Select the trunk group number used for the
outgoing ARS call (1 ~ 100).
ARS/F-Route Table – Beep Tone
44-05-04
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Turn Off or On a beep
tone if a lower priority trunk group is used.
ARS/F-Route Table – ARS Class of Service
44-05-07
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Class of
Service used for ARS. An extension ARS COS
is determined in Program 26-04-01.
ARS/F-Route Table – Dial Treatment
44-05-08
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Dial
Treatment to be used for the table.
The recommended treatment code is D019RE
where 9 is the trunk access code in the destination
system.
The Dial Treatments are determined in Program
26-03-01.
ARS/F-Route Table – Maximum Digit
44-05-09
Input the maximum number of digits to send
when using the F-Route.
ARS/F-Route Table – CCIS over IP
44-05-10
Destination Point Code
Input the Destination Point Code to send when
using F-Route.
CCIS System Setting – CCIS Availability
50-01-01
No other CCIS settings function if this program
is disabled.
Connecting System Settings – Originating
50-02-03
Point Code
For route ID 9, set the origination point code.
Input Data
0 = No Setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
1 = Delete Digit = 0 ~ 255
(255: Delete All Digits)
2 = 0 ~ 500
(0 = No Setting)
3 = Dial Extension Analyze
Table Number = 0 ~ 4
(0 = No Setting)
0 ~ 100, 255
0 = No Setting
255 = Extension Call
0 = Off (No Beep)
1 = On (Beep)s
0 ~ 16
0 ~ 15
0 ~ 24
0 ~ 16367
0 = Disable
1 = Enable
0 ~ 16367
823
Default
0
0
0
0
0
0
0
0
0
No Setting