Trunk Disconnect Continue/Disconnect Codes - NEC UNIVERGE SV9100 Features And Specifications

Trunk Disconnect Continue/Disconnect Codes:

Program
Program Name/Description
Number
Basic Trunk Data Setup – Continued/
14-01-25
Discontinued Trunk-to-Trunk Conversation
Enable/Disable the ability to dial a service code
to continue or disconnect the trunk-to-trunk
conversation after the alert tone is heard.
Trunk to Trunk Conversation – Conversation
20-28-01
Continue Code
Input the code that can be dialed to continue
the conversation after the Trunk-to-Trunk
Release Warning tone is heard.
Trunk to Trunk Conversation – Conversation
20-28-02
Disconnect Code
Input the code that can be dialed to disconnect
the conversation after the Trunk-to-Trunk
Release Warning tone is heard.
Trunk to Trunk Conversation – Conversation
20-28-03
Continue Time
Input the time the conversation extends when
the Conversation Continue Code is dialed.
System Options for Transfer – Trunk-to-
24-02-07
Trunk Transfer Release Warning Tone
This timer starts when a trunk begins talking
with another trunk (for example: Trunk-to-Trunk
Transfer/Tandem Trunking). When this time
expires, a warning tone is heard. If Program
24-02-10 is set, the conversation disconnects
after time expires. This time is set again when
the external digit timer expires. One of the
trunks used must be an analog trunk (or leased
line).
Input Data
0 = Disable
1 = Enable
#
0 ~ 9, , *
#
0 ~ 9, , *
0 ~ 64800 seconds
0 ~ 64800 seconds
1207
Default
0
No Setting
No Setting
0
1800