Programming From A Multiline Terminal - NEC UNIVERGE SV9100 Features And Specifications

Programming from a Multiline Terminal

Description
System Programming can be performed from any display multiline terminal. Most programming
changes become effective immediately. Other programming changes become effective after the data is
backed up from temporary memory to permanent memory.
Conditions
Up to two telephones can be in programming mode anytime.
A maximum of four users can be logged into WebPro anytime.
Two WebPro users and two phone programming users can be logged in at the same time
for a total of four users in programming mode simultaneously. However, the two phone
programming users do not show up in session management in WebPro.
PCPro can be logged in with only one user. This is allowed only if no other users are
logged into programming mode (PCPro, WebPro, or Phone). Also, if a user is connected to
the switch via PCPro, no other user can log in through PCPro, WebPro, or Phone
Programming.
Programming from a multiline terminal can require a password to enter programming.
Temporary License can be activated only from a multiline terminal, not PCPro or WebPro.
When activated, the system is temporarily licensed for all licenses except Encryption (feature
code 0030).
Each time the temporary license is activated, the program is read only until the temporary
license expires.
Each time the temporary license expires, it can be set again for up to 10 additional days.
After setting a number of days in the program, subsequent days show one less as it counts
down to expiration.
When
license expires, the system resets.
If the date is changed in
subtracted from the license period.
If the date is changed in
system resets when it is applied (Transfer), not when exiting programming mode.
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals with Display
Program
90-37-01 shows 1, the license expires at midnight on that day. When the
Program
Program
10-01-01 while the temporary license is in effect, one day is
10-01-01 when the temporary license shows 1 day, the
1002