Programmable Function Keys - NEC UNIVERGE SV9100 Features And Specifications

Operation

Programmable Function Keys

To define a Programmable Function Key as a One-Touch Key:
1. Dial the service code for Function Key Programming (Program 11-11-17, 851 by default).
2. Press the key to be defined.
3. Dial 01 (DSS/One-Touch Key Operation).
4. For Direct Station Selection (Extension):
a. Dial extension number you want assigned to that key.
b. Press Hold.
c. Press Speaker.
For Personal Speed Dial:
a. Dial the general trunk access code (9).
Dial the Specific Trunk Service Code (805) plus the trunk number (e.g., 005).
Dial the Trunk Group Service Code (804) plus the trunk group number (e.g., 1).
b. Dial the number you want to store.

The total of the digits stored in steps 3 and 4 cannot exceed 24.

Valid entries are 0~9, # and
c. Press Hold.
d. Press Speaker.
For Speed Dial – System/Group:
a. Dial 813 to store a Speed Dial – System dialing number.
- OR -
Dial 814 to store a Speed Dial – Group dialing number.
b. Dial Speed Dial number storage code (e.g., 001).
c. Press Hold.
d. Press Speaker.
For Central Office Calls, Placing (Trunk Calling):
a. Dial the general trunk access code (9).
Dial the specific Trunk Service Code (#9) plus the trunk number (e.g., 005).
Dial the Trunk Group Service Code (704) plus the trunk group number (e.g., 1).
b. Dial the telephone number to be stored.
c. Press Hold.
d. Press Speaker.
For Service Codes:
a. Dial the Service Code you want stored.

For example, if you want a One-Touch Key to automatically clear your Last Number Redial, enter 776.
- OR -
- OR -
. To enter a pause, press MIC. To store a Flash, press Redial.
*
- OR -
- OR -
936