NEC UNIVERGE SV9100 Features And Specifications page 762

Related Features
None
Guide to Feature Programming
IP Trunk – (SIP) Session Initiation Protocol:
Program
Program Name/Description
Number
GCD-CP10 Network Setup – Default
10-12-03
Gateway
Assign the default gateway IP address for the
GCD-CP10.
GCD-CP10 Network Setup – NIC Interface
10-12-05
Set up the NIC Interface.
GCD-CP10 Network Setup – NAPT Router IP
10-12-07
Address
(Default Gateway [WAN])
Define the IP Address of the WAN side of the
router.
Only used when Program 10-20-21 is enabled.
GCD-CP10 Network Setup – ICMP Redirect
10-12-08
When receiving ICMP redirect messages, this
determines if the IP Routing Table updates
automatically or not.
GCD-CP10 Network Setup – IP Address
10-12-09
Set IP address for GPZ-IPLE.
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex 4
= 10Mbps, Half Duplex 5
= 1Gbps, Full Duplex
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0= (Enable)
1= (Disable)
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
762
Default
0.0.0.0
0
0.0.0.0
0
172.16.0.10