NEC UNIVERGE SV9100 Features And Specifications page 383

Guide to Feature Programming
Program
Program Name/Description
Number
10-09-01 DTMF and Dial Tone Circuit Setup
Reserve at least one circuit for DTMF reception
(entry 0 or 2).
Use the following as a guide when allocating
DTMF receivers:
In light traffic sites, allocate one DTMF
receiver for every 10 devices that use them.
In heavy traffic sites, allocate one DTMF
receiver for every five devices that use
them.
11-01-01 System Numbering
Define the system numbering plan.
Trunk Access Code – 2nd Trunk Route
11-09-02
Access Code
Assign the Service Code set up in Program
11-01 for 2nd (Alternate) Trunk Route Access.
Basic Trunk Data Setup – Transmit Level
14-01-02
Customize the transmit and receive levels of
the CODEC Gain Types for each trunk.
Input Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Dial (maximum of four digits)
Trunks 1 ~ 400
1 ~ 57
(-15.5 ~ +12.5dB in 0.5dB
intervals)
383
Default
Circuit/Resource
01 ~ 08 = 1
(Extensions)
Circuit/Resource
09 ~ 32 = 2
(Trunks)
Circuit/Resource
33 ~ 144 = 0
(Common)
When
GPZ-BS10 is
installed, 81 ~
144 are available
No Setting
32 (0dB)