NEC UNIVERGE SV9100 Features And Specifications page 192

Program
Program Name/Description
Number
System Options for Incoming Calls – DIL No
22-01-04
Answer Recall Time
A DIL that rings its programmed destination
longer than this interval diverts to the DIL No
Answer Ring Group (set in Program 22-08).
22-02-01 Incoming Call Trunk Setup
Set the feature type for the trunk you are
programming.
Trunk Ring Tone Range – Ring Tone Pattern
22-03-01
Assign Ring Tone Ranges to trunks. Trunks
ring extensions according to the Ring Tone
Range selected in Program 22-03-0 and the
settings made with either Service Code 720 or
Program 15-02-02.
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions (up to 48) to Ring Groups.
Calls ring extensions according to Ring Group
programming. There are 100 available ring
groups.
22-05-01 Incoming Trunk Ring Group Assignment
To have the trunks ring extensions, assign
trunks to a Ring Group. The incoming ring
group assignment programmed in Program
41-03-01 overrides the setting in this program.
Input Data
0 ~ 64800 seconds
0 = No Overflow
Trunks 1 ~ 400
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0 = Ring Tone Pattern 1
1 = Ring Tone Pattern 2
2 = Ring Tone Pattern 3
3 = Ring Tone Pattern 4
4 = Melody 1
5 = Melody 2
6 = Melody 3
7 = Melody 4
8 = Melody 5
9 = Ring Tone Pattern 5
10 = Ring Tone Pattern 6
11 = Ring Tone Pattern 7
12 = Ring Tone Pattern 8
Maximum of eight digits.
Trunks 1 ~ 400
Incoming Group Number for
Day/Night Mode (1 ~ 8):
0 = (No Setting)
001 ~ 100 = (Incoming Group)
102 = (In-Skin/ External Voice
Mail or InMail)
103 = (Centralized VM)
192
Default
0
0
0
Extensions 101
~ 108 (first eight
ports) ring for
incoming Ring
Group 1 calls.
No other
extensions ring
for incoming
Ring Group 1
calls.
1