NEC UNIVERGE SV9100 Features And Specifications page 83

Program
Program Name/Description
Number
ARS Dial Treatments – Treatment Code
26-03-01
Assign the Dial Treatments (1 ~ 15) for
automatic ARS dialing translation. Assign Dial
Treatments to Service Numbers (Trunk Groups)
in Program 26-02. The ARS Dial Treatment
options are:
3 - Delete the NPA if dialed as part of the initial
call. This requires at least eight digits in the
ARS table (Program 26-02-01).
2 - Delete the leading digit if dialed as part of
the initial call. This requires at least eight digits
in the ARS table (Program 26-02-01).
1 - Add a leading 1 if not dialed as part of the
initial call. This requires at least eight digits in
the ARS table (Program 26-02-01).
INPA - Insert the NPA specified by NPA.
DNN - Outdial the NN number of digits or
execute the code that follows. For example,
D041234 out-dials 124. Valid entries are 0 ~ 9,
#
, *, Wnn (wait nn seconds) and P (pause).
Each digits code counts as a digit. So for
example, if a P was added for a pause, the
entry would look like: D05P1234. This Dial
Treatment can only be added from telephone
programming.
Wnn - Wait nn seconds.
P - Pause in analog trunk.
R - Redial the initially dialed number, including
any modifications.
E - End of Dial Treatment. All Dial Treatments
must end with the E code.
X - When ARS is enabled, X must be entered in
the Dial Treatment for the system to output the
extension number of the call originator to the
black box for the E911 feature.
26-04-01 ARS Class of Service
Set an extension ARS Class of Service
(0 ~ 16). Automatic Route Selection (ARS) uses
ARS Class of Service when determining how to
route extension calls.
26-13-01 ARS Class of Service for NetLink (DT800/
DT700)
Use to set an extension's ARS Class of Service
when used for NetLink. Automatic Route
Selection uses ARS Class of Service when
determining how to route an extension's calls.
ARS/F-Route Table – Trunk Group Number
44-05-01
Select the trunk group number to be used for
the outgoing ARS call.
Input Data
Maximum of 24 characters
Day/Night Mode: 1 ~ 8
Class = 0 ~ 16
Day/Night Mode: 1 ~ 8
Class = 0 ~ 16
0 ~ 100, 255
0 = No Setting
255 = Extension Call
83
Default
No Setting
0
0
0