NEC UNIVERGE SV9100 Features And Specifications page 425

Guide to Feature Programming
Program
Program Name/Description
Number
Service Code Setup (for Service Access) –
11-12-42
Flash on Trunk lines
Customize the flash on trunk lines Service
Codes.
Service Code Setup (for Service Access) –
11-12-59
Trunk Drop Operation for SLT
Customize the trunk drop operation for single
line telephone Service Codes.
Analog Trunk Data Setup – Flash Type
14-02-03
Select the flash type.
Analog Trunk Data Setup – Hooking Type
14-02-04
Use Flash for Timed Flash (Program 81-01-14)
or Disconnect (Program 81-01-15). (A user can
press the FLASH key while on a trunk call to
implement Flash.)
Multiline Telephone Basic Data Setup –
15-02-05
Transfer Key Operation Mode
If the Conf key should access Flash, enter 2.
Otherwise, enter 0 or 1.
Single Line Telephone Basic Data Setup –
15-03-04
Flashing
Enable/Disable Flash for single line (500/2500
type) telephones.
15-07-01 Programmable Function Keys
Assign a function key for Drop Key (code 84) if
required.
Input Data
SLT
*
#
0 ~ 9, , Maximum of eight
digits
SLT
*
#
0 ~ 9, , Maximum of eight
digits
0 = Open Loop Flash
1 = Ground
Always set this option for Open
Loop Flash (0)
0 = Timed Flash (Hooking)
1 = Disconnect (Cut)
0 = Transfer
1 = Serial Call
2 = Flash
0 = No
1 = Yes
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
425
Default
#
3
No Setting
0
0
0
1