Use The Drop Key From Multiline Terminal With Co/Pbx Call In Progress; To Use Feature Plus Recall From A Multiline Terminal - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
COI Initial Data Setup – Hookflash Time
81-10-07
Selection 1
Set the Flash duration (20ms ~ 5.0 sec) for
analog trunk [COI( )-U( ) ETU] circuits.
COI Initial Data Setup – Hookflash Time
81-10-08
Selection 2
Set the open loop disconnect duration
(20ms ~ 5.0 sec) for analog trunk [COI( )-U( )
ETU] circuits.
Operation
To use the Drop Key from a multiline terminal with a CO/PBX call in progress:
1. Press the Function key programmed as a Drop Key.
2. Receive the new CO/PBX dial tone.
3. Dial the desired number.
To use Feature plus Recall from a multiline terminal with a CO/PBX call in progress:
1. Press Feature.
2. Press Recall.
Input Data
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = 20ms
1 = 40ms
2 = 60ms
3 = 80ms
4 = 100ms
5 = 140ms
6 = 160ms
7 = 200ms
8 = 400ms
9 = 600ms
10 = 800ms
11 = 1.0 seconds
12 = 1.5 seconds
13 = 2.0 seconds
14 = 3.0 seconds
15 = 5.0 seconds
0 = 20ms
1 = 40ms
2 = 60ms
3 = 80ms
4 = 100ms
5 = 140ms
6 = 160ms
7 = 200ms
8 = 400ms
9 = 600ms
10 = 800ms
11 = 1.0 seconds
12 = 1.5 seconds
13 = 2.0 seconds
14 = 3.0 seconds
15 = 5.0 seconds
426
Default
Extension port
101 = Class 15
All other
extension port =
Class 1
9 (600ms)
14 (3.0 seconds)