NEC UNIVERGE SV9100 Features And Specifications page 200

Program
Program Name/Description
Number
Multiline Telephone Basic Data Setup –
15-02-08
Automatic Handsfree
Set whether pressing a key accesses a
One-Touch Key or
Preselects the key.
Single Line Telephone Basic Data Setup –
15-03-03
Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
15-06-01 Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
15-07-01 Programmable Function Keys
Assign functions to multiline terminal line keys.
System Options for Multiline Telephones –
20-02-06
Preselection Time
Set the preselection time When a multiline
terminal user preselects a line key, the system
remembers the preselection for this time.
System Options for Multiline Telephones –
20-02-09
Disconnect Supervision
Enable/Disable disconnect supervision for the
system trunks.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
20-07-12 Class of Service Options (Administrator
Level) – Trunk Port Disable
Turn Off or On an extension ability to use the
Trunk Port Disable feature.
20-08-02 Class of Service Options (Outgoing Call
Service) – Trunk Outgoing Calls
Turns Off or On outgoing trunk calling for the
extension.
20-13-13 Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
System Options for Outgoing Calls –
21-01-15
Outgoing Disable on Incoming Line (Toll
Restriction)
Enable/Disable the Outgoing Disable on
Incoming Line feature.
Input Data
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
0 = Normal
1 = Special
Trunk Access Maps: 1 ~ 400
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 ~ 64800 seconds
0 = Disable
1 = Enable
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Disable (Off)
1 = Enable (On)
200
Default
1
0
1
5 seconds
1
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 14= 0
COS 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
0