NEC UNIVERGE SV9100 Features And Specifications page 388

Program
Program Name/Description
Number
VRS/DISA One-Digit Code Attendant Setup –
25-06-01
Next Attendant Message Number
Set up single digit dialing through the VRS. This
gives VRS callers single-key access to
extensions, the company operator, Department
Calling Groups and Voice Mail. For each VRS
message set to answer outside calls (see
Program 25-02 and Program 25-05), you
specify:
The digit the VRS caller dials (0 ~ 9, *,
(Keep in mind that if you assign destinations
to digits, outside callers cannot dial system
extensions, starting with that digit.
The destination reached (eight digits
maximum) when the caller dials the
specified digit.
The destination can be an extension, a
Department Calling pilot number or the Voice
Mail master number. A one-digit code can be
assigned for each Automated Attendant
message.
VRS/DISA One-Digit Code Attendant Setup –
25-06-02
Destination Number
Set up single digit dialing for Automated
Attendant callers. For each VRS Message
programmed to answer outside calls, specify:
The digit the Automated Attendant caller
dials (1 ~ 12, where 10 = 0, 11 = * and
#
12 = ). (Keep in mind that if you assign
destinations to digits three and four, outside
callers cannot dial system extensions that
begin with that digit.)
The destination reached (four digits
maximum) when the caller dials the single
digit code.
System Timers for VRS/DISA – VRS/DISA
25-07-01
Dial Tone Time
After answering the DISA trunk, the system
waits this time for the caller to dial the first digit
of the DISA password. If the caller fails to dial
during this time, the system drops the call.
System Timers for VRS/DISA – VRS/DISA No
25-07-02
Answer Time
A DISA caller can ring an extension for this time
before the system sets the call as a Ring No
Answer. After this time expires, the call follows
the programmed Ring No Answer routing (set in
Program 25-03 and 25-04).
Input Data
0 ~ 100 (0 = No Setting)
101 = Voice Mail Answers
104 = Refer to 25-04: VRS/DISA
Transfer Ring Group with No
Answer/ Busy
105 = Dial the other extension
106 = Record VRS
#
).
Maximum of eight digits
0 ~ 64800 seconds
0 ~ 64800 seconds
388
Default
0
No Setting
10
0