NEC UNIVERGE SV9100 Features And Specifications page 573

Guide to Feature Programming
Program
Program Name/Description
Number
Service Tone Timers – Extension Dial Tone
20-18-01
Time
After completion of dial tone time Intercom dial
tone, a telephone user has this time to dial the
first digit of the Intercom call.
Service Tone Timers – Busy Tone Timer
20-18-02
After Program 20-18-01 expires Busy Tone will
play for time programmed in this memory block.
Service Tone Setup – Repeat Count
80-01-01
Customize the system basic tones and system
service tones. The system must be reset for
the changes to take affect.
Service Tone Setup – Basic Tone Number
80-01-02
The following features require that the system
tones listed below be changed to match the
table. After changing these settings the
system must be reset for the changes to take
effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Operation
None
Input Data
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 255 (0 = until On-Hook)
1 ~ 33
0 = No Tone
33 = Default Time Slot
573
Default
30
15
Refer to Table 2-
31 Service Tone
Setup Defaults,
Program
80-01-01