NEC UNIVERGE SV9100 Features And Specifications page 253

Program
Program Name/Description
Number
20-13-46 Class of Service Options (Supplementary
Service) – Remote Conference
Set Class of Service option for Remote
conference.
Remote Conference Group Setting –
20-34-01
Remote Conference – Name
Set name for remote conference 1 - 20.
Remote Conference Group Setting –
20-34-02
Remote Conference – Password
Set password for remote conference 1 - 20.
Remote Conference Group Setting –
20-34-03
Remote Conference – Remote Conference -
Maximum Participants
Define the maximum number of participants of
a Remote Conference.
Remote Conference Group Setting –
20-34-04
Remote Conference - Maximum Conference
Duration
Set the time limit (in seconds) for each
conference.
When this time passes, the conference is
disconnected by the SV9100.
Remote Conference Group Setting –
20-34-05
Remote Conference - Ending Conference
Alert Tone Time
Determine how long prior to disconnecting a
Remote Conference call (based on the
maximum conference duration above) the
SV9100 should send out a beep.
This is used to warn the conference
participants of the pending disconnect.
Remote Conference Group Setting –
20-34-06
Remote Conference - Password Mode
Set remote conference to skip password or
prompt for password.
Remote Conference Group Setting – MCU
20-34-07
Mode for Remote Conference
If using the Simple MCU Video feature set the
MCU video mode for the remote conference.
This will also require VoIP licenses (5103).
Setting this value for mode 1 or mode 2
determines whether Program 84-27-22 or Program
84-27-23 is used.
Input Data
0 = Disabled
1 = Enabled
Maximum of 12 characters.
Maximum of 4 numbers.
0 ~ 32
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = Normal
1 = Skip
0 = Disable
1 = Mode1
2 = Mode2
253
Default
COS 1 ~ 15 = 1
Conferences
1 ~ 4 =
Conf 1 - Conf 4
Conferences
5 ~ 20 = blank
Conferences
1 ~ 4 = 1111
Conferences
5 ~ 20 = blank
Conferences
1 ~ 8 = 8
Conferences
9 ~ 20 = 0
7200 seconds
300 seconds
0
0