Std Sip Transfer – Unattended - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
IP Telephone Terminal Basic Data Setup –
15-05-16
Authentication Password
Assign the authentication password for SIP
single line telephones.
IP Telephone Terminal Basic Data Setup – IP
15-05-18
Duplication Allowed Group
For an adapter that has one IP address coming
into it but multiple extensions off of it. Enable
this option for all extensions in the group so the
CPU knows that the one IP Address is assigned
to multiple extensions.
IP Telephone Terminal Basic Data Setup –
15-05-40
Calling Name Display Info via Trunk for
Standard SIP
Sets the incoming calling name display type on
a standard SIP terminal. Trunk name is the first
priority and abbreviated (SPD) name is second
priority.
IP Telephone Terminal Basic Data Setup –
15-05-43
Video Mode
Enable or Disable Video Mode for standard SIP
terminals.
IP Telephone Terminal Basic Data Setup –
15-05-49
Receiving SIP INFO
Select whether or not system can receive
DTMF from standard SIP phone via SIP INFO
message.
STD SIP Transfer – Unattended:
Program
Program Name/Description
Number
IP Telephone Terminal Basic Data Setup –
15-05-50
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
Input Data
Maximum of 24 characters.
0 = Disable
1 = Enable
0 = Both name and number
1 = Name only
2 = Number only
3 = None
0 = Disable
1 = Enable
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is not
available
Input Data
0 = Disable
1 = Enable
738
Default
No Setting
0
0
0
1
Default
1