NEC UNIVERGE SV9100 Features And Specifications page 598

Program
Program Name/Description
Number
Group Mailbox Subscriber Options –
47-06-05
Recording Conversation Beep
Enable/Disable the Conversation Record beep.
If enabled, all parties on a call hear the voice
prompt Recording followed by a single beep
when the extension user initiates Conversation
Record. If disabled, the voice prompt and beep
do not occur. When you disable the
Conversation Record beep, the following voice
prompts do not occur while InMail records the
conversation:
Recording (followed by a beep) That mailbox is
full (if the mailbox message storage capacity is
reached).
You have reached the recording limit (if the
recorded message is too long).
The SV9100 telephone system software
provides an additional Conversation Record
beep. This beep repeats according to the
setting of Program 45-01-06: Voice Mail
Integration Options: Record Alert Tone Interval
Time.
Group Mailbox Subscriber Options –
47-06-06
Message Waiting Lamp
Enable/Disable Message Waiting lamp at the
extension associated with the Subscriber
mailbox. For Subscriber Mailboxes, you should
enable this option. For Guest Mailboxes, you
should disable this option.
Group Mailbox Subscriber Options – Auto
47-06-07
Attendant Do Not Disturb
Enable/Disable Auto Attendant Do Not Disturb.
When a subscriber enables Auto Attendant Do
Not Disturb, an Automated Attendant caller
routes directly to the mailbox, hears the
greeting, and is asked to leave a message. A
subscriber can also enable Auto Attendant Do
Not Disturb while recording their mailbox
greeting.
Group Mailbox Subscriber Options – Forced
47-06-08
Unscreened Transfer
Enable/Disable Automated Attendant Forced
Unscreened Transfer for the Subscriber
Mailbox. If enabled, each Screened Transfer
(TRF) to the extension is converted to an
Unscreened Transfer (UTRF). If disabled,
Screened Transfers from the Automated
Attendant occur normally.
Input Data
0 = No (Disable)
1 = Yes (Enable)
0 = Disable
1 = Enable
0 = Disable
1 = Enable
0 = Disable
1 = Enable
598
Default
1
1
0
0