Joining A Remote Conference Call - NEC UNIVERGE SV9100 Features And Specifications

Operation

Joining a Remote Conference Call:

1. Internal Party: Lift the handset and dial the extension number of the Remote Conference pilot
number (assigned in Program 11-19-01).
- OR -
External Party: Dial the telephone number for the Remote Conference pilot number (assigned in
Program 11-19-01).
2. If enabled, the system prompts for a password.
3. Dial the conference group password.
4. If the correct password is entered the caller is added to the Remote Conference. If the wrong
password is entered a warning tone is heard and you must hang up and dial back into the
conference pilot.
As the conference time limit nears, the system will provide a warning tone to all participants
based on Program 20-34-05. Once this timer expires, if the conference is still ongoing, the
participants will be disconnected by the system.
If an incorrect password is entered a warning tone is heard and the caller must hang up and dial
back into the conference pilot.
254